Open-Plan Remodels in Denver and Austin Homes: Which Walls Can Come Down

| 5 min read

load-bearing wall

Knocking out a wall between the kitchen and living room is one of the most requested changes in Denver houses and Austin townhouses alike. The trouble is that a wall can look identical to its neighbors and still be doing structural work. Before any sledgehammer comes out, you need to know which kind you're dealing with.

What a load-bearing wall is actually doing

A load-bearing wall carries the weight of floors, the roof, or other structural elements above it and passes that load down toward the foundation. A non-load-bearing wall, often called a partition wall, mostly divides space and carries little beyond its own weight.

Think of the house as a chain of supports. Roof loads land on the walls below, upper floors rest on beams and walls, and everything funnels into the foundation. A load-bearing wall is one link in that chain. Pull it out and the chain has a gap.

A table makes the point well. Remove one leg while something heavy sits on top, and the weight doesn't vanish. It moves to the remaining legs, or the top gives way. In a house, removing a structural wall without a replacement can overload the framing above, and the symptoms can appear in rooms nowhere near the demolition.

Mathew Roth, owner of Hawthorn Builders, explains why this catches so many homeowners off guard:

“Homeowners see a wall as a divider, but in many houses it’s part of the structure – it’s carrying the weight of the floors and roof above it down to the foundation. Take out a load-bearing wall without a plan and that load has nowhere to go; that’s how you get sagging floors, cracked ceilings, and doors that suddenly won’t close.”

The phrase that matters is “without a plan.” The structure itself isn't the problem. The problem is removing support without giving the weight another route to the ground.

Can you spot a load-bearing wall by looking at it?

Not reliably. Still, a few general patterns come up again and again, and they're worth knowing as starting points.

Possible indicator What it may suggest
Exterior wall Often helps support the roof or floors above
Wall near the center of the home May support floor or roof framing
Wall directly below another wall or beam Could be part of the home's load path
Wall perpendicular to floor joists May provide structural support, depending on the framing

These are hints, not verdicts, and they come with plenty of exceptions. Framing can change from one section of a house to the next. Past renovations may have moved or added supports without leaving obvious traces. A wall that looks ordinary may carry more than you'd expect, and a thick wall may carry nothing at all.

That's why a qualified structural professional, such as a structural engineer, should make the call after examining how the home was actually built. Older homes and houses with earlier remodels are especially hard to read.

Here's the thing, though: a non-load-bearing wall isn't automatically a free-for-all. Interior walls often hide wiring, plumbing, or ductwork, and some serve safety or structural functions that don't show up on a quick walkthrough. An evaluation before any demolition tells you what's really involved.

So can a load-bearing wall ever come out?

Yes, many can. The condition is that the weight gets a new path first. In most cases that means installing a beam, sometimes supported by posts, that takes over the load the wall used to carry and delivers it to the foundation.

Sizing that beam is an engineering calculation. It depends on what sits above, how far the beam must span, and what sits beneath to support it.

Evan Greene, owner of EPG Homes in Chattanooga, TN, points to a detail many homeowners miss:

“What most homeowners don’t realize is that a wall can be carrying a point load, where a beam, girder, or post from the floor or roof above lands on one concentrated spot instead of spreading out along the wall. Take that wall out and all of that weight needs a new path down to the foundation, which usually means an engineered beam, posts sized for the load, and sometimes a new footing under the floor. On top of the structure, walls often hide wiring, plumbing drains, vent stacks, and ductwork that have to be rerouted.”

That's the part that changes project scope. The cost of a wall removal often hinges on what's inside and underneath the wall, not the drywall itself. A wall that looks like a weekend job can turn into a major structural project once those details surface.

What drives the cost of removing one

There's no reliable single number. Costs swing with the home, the location, and the scope of the work. A few factors consistently shape the total:

  • What the wall supports. A wall carrying one floor or a roof section usually needs less replacement support than one carrying several levels. A wider opening typically calls for a larger beam.
  • Beam and support materials. Engineered wood and steel differ in price and installation effort, and the engineer's design determines which one goes in.
  • Temporary bracing. Contractors often brace the structure above while the wall comes out and the new beam goes in. That adds labor and materials.
  • Plans, permits, and inspections. Engineering drawings, permit fees, and inspection requirements vary by location.
  • Finish work. Patching drywall and ceilings, repairing flooring, and repainting usually follow once the wall is gone.

Rerouted utilities and new footings can push the number higher still. Some of these details only become visible once the wall is opened or evaluated, so early estimates often shift. A structural assessment followed by written estimates from licensed contractors gives you a far more accurate picture before you commit.

What to sort out before you pick up a tool

Start with the wall's job, not the demolition date. Knowing whether it carries weight and what it connects to shapes the design, the budget, and who needs to be involved.

  • Bring in qualified professionals. A structural engineer designs the replacement support, and a licensed contractor carries out the work. Licensing rules differ by state and city, so confirm what applies where you live and ask each contractor for proof of license and insurance.
  • Get the structural evaluation first. The engineer's assessment tells you what the wall supports and what a replacement has to look like.
  • Expect permits and inspections. Model codes such as the International Existing Building Code generally treat cutting into structural supports differently from cosmetic repairs. Requirements vary by city and county, so your local building department is the final word on what applies.
  • Map the hidden systems. Plumbing, wiring, and ductwork inside a wall can change both the timeline and the price, even when the wall isn't structural.
  • Scope the whole job. Beams, new supports, and rerouted utilities can turn a modest layout change into a larger project. Get that picture before you lock in a floor plan.

If you're weighing a layout change, the home's age and any documented past work are worth a close look too. Earlier remodels are where surprises tend to hide.

Common questions about load-bearing walls

Who can confirm whether a wall is load-bearing?

A structural engineer is the usual choice. They review the framing and, where available, the home's original plans. Plans are a useful starting point, but they may not reflect changes from later renovations, so an in-person review still matters.

Do you need a permit to remove a non-load-bearing wall?

It depends on where you live. Some jurisdictions exempt minor interior work, while others require a permit if the wall contains electrical, plumbing, or mechanical systems. Your local building department can tell you which rules apply.

Are all exterior walls load-bearing?

Not necessarily. Many exterior walls carry load, but it depends on how the house is framed and how the roof is supported. That's another reason to have the structure reviewed rather than assume.

What if a previous owner already removed a wall?

If you're buying or living in a home where a wall has already come out, ask whether that work was permitted and inspected. Local building departments may keep permit records on file. If you notice sagging floors or new cracks near the altered area, a structural engineer should take a look.

Why you can't just knock down any wall

A wall's role isn't always visible from the room. Some walls only divide space. Others help hold up the floors and roof above, and removing one without a plan can affect the entire structure. Finding out which kind you have comes before any demolition.

For buyers and remodelers in Denver and Austin, that answer will shape both the renovation budget and the timeline. Get the evaluation early, and the open-plan kitchen you're picturing has a much better chance of arriving on schedule and on budget.

Source: Freda Nkrumah · www.redfin.com